grinding mills - horizontal
Principle of Operation In a Dyno-Mill the fluid product to be dispersed is pumped through a water-jacketed grinding vessel at a controlled rate by an external pumping system.
The fluid in a Dyno-Mill vessel is subjected to a combination of intense impact and high-shear forces created by the impeller system and media particles. The effect is to produce a smooth, uniform, finely ground deagglomerated pigment, thoroughly wetted to its primary particle size and beyond.
Fineness of grind depends on dwell time in the vessel, agitator speed, media loading, media size, media density, formulation of the premix, and effectiveness of the preliminary mixing and wetting.
Vertical vs. Horizontal Grinding Mills
| Technology | Model Type | Cost | Efficiency | Target Size | Mat'l of Construction | | Vertical | Red Head | Lower | Single/Multi-pass | < 6 microns | Standard | | Horizontal | KD Dyno-Mill | Medium | Single-pass | < 2 microns | Advanced | | ECM Dyno-Mill | Higher | Higher output | < 0.2 microns | Exotic |
KD Series Production Grinding Mills DYNO-MILL 
ECO-5 Model | The Dyno-Mill KD grinding mill series is a continuously operating media grinding mill with a horizontal grinding container for dispersion and fine wet grinding. The models in this series were designed for difficult-to-grind products and are able to deagglomerate as well as reduce particle size. | 
KD-600 Model |
Dyno Mill KD grinding mill series are suitable for use in the Chemical, Agrochemical, Pigments, Dyestuffs, Paints, Inks, Coatings, Fillers, and Mineral Grinding industries.
Please click on the model that matches your output needs from the list below:
ECM Series Production Grinding Mills DYNO-MILL 
ECM-Poly | The Dyno-Mill ECM high-efficiency technology allows for greater throughput rates and finer dispersions than conventional grinding mills.
The unique construction minimizes media slippage and friction, providing more efficient use of available energy for dispersion.
| 
ECM-Pro/Plus |
As with the Dyno Mill KD grinding mill series, ECMs are suitable for use in the Chemical, Agrochemical, Pigments, Dyestuffs, Paints, Inks, Coatings, Fillers, and Mineral Grinding industries.
Please click on the model that matches your output needs from the list below:
Lab Grinding Mill DYNO-MILL  Capable of producing small-lot dispersions, DYNO-MILL lab grindgin mills are the ultimate all-purpose grinding mill for research and small batch applications.
By optimizing the process in the lab, users can improve:
 Product formulation
Formulation viscosity
Media type
Media size
Media loading
Residence time
to positively affect production time. Please visit the lab models grinding mill to learn more.
|